IRC Blipper Upgrade Ducati Multistrada V4 S 21 -25
PLN 1,346.50
Available, delivery time: 1-2 weeks
Product "IRC Blipper Upgrade Ducati Multistrada V4 S 21 -25"
Adjustable Quickshifter/Blipper in Replacement for OEM Sensor Installation
Upgrade your factory quickshifter!
The original quickshifter or blipper sensor on modern superbikes is typically a non-adjustable, spring-loaded mechanical switch. It requires significant foot pressure to activate, which can lead to premature wear on the shift forks, causes a harsh and wooden shift feel, and leads to unnecessary rider fatigue.
This fully plug-and-play system with OEM-compatible connectors and a matching shift rod replaces the original sensor and allows you to independently and precisely adjust the required pressure for both upshifts and downshifts.
The result: smoother shifting, reduced mechanical wear, and significantly improved riding dynamics.
- Universal function – works in both push and pull direction (Quickshifter & Blipper)
- Complete kit including all necessary mounting hardware
- Compact sensor: Ø 15 mm, length 50 mm
- No moving parts – completely wear-free
- Heat and vibration resistant, waterproof
- Built-in display – no PC connection required
- Individually adjustable shift pressure – with peak load memory
- Real-time load monitoring
- Extremely durable – tested for 1.5 million shift cycles at 65 kg load
Note: No road approval (no ABE)
Warranty: 2-year manufacturer’s warranty
Installation notice
IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most.
Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles:
- Ignition coils
- Throttle position sensor (TPS)
- Gear position sensor
- Throttle grip / twist grip sensor
- Demand sensor
- Fuel injectors
Equally important during installation:
- Work carefully — seat all connectors fully, keep contacts dry and corrosion-free, observe torque values.
- Mind the cable management — route wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly.
- Follow the IRC installation instructions — sequence, pin assignment and operating parameters are product-specific.
- Be able to read fault codes — most irregularities after a modification can be narrowed down within minutes.
A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable. If you are unsure, have the installation done by a specialist workshop or an experienced racing mechanic — and feel free to contact us with technical questions.
These products are intended exclusively for racing and track use and are not approved for use on public roads. Damage caused by improper installation, deviating settings or inadequate cable management is excluded from the manufacturer’s warranty.
Warranty conditions
This product is covered by the international warranty conditions of IRC S.r.l.
Login
PRODUCTS RSV4 / TUONO V4 -2020
The intelligent cooling system for consistent engine temperatures, optimal performance and maximum durability – fully plug-and-play, track-proven and reliable. Benefits Faster warm-up and stable operating temperature No more power loss from driving the water pump Controlled cool-down after shut-off Improved engine reliability in extreme temperatures Reduced system-related wear Key Technical Features Easy installation Complete plug-and-play system – no modifications required, vehicle-specific pre-assembled harness. Automatic temperature control The IEC controller keeps the engine in the optimal temperature range at all times – for consistent performance and reduced wear. Proportionally controlled cooling Water pump and fan continuously adapt their output to actual engine heat – efficient and quiet. Cooling after shut-off Even after switching the engine off, cooling remains active to reliably prevent heat soak. High-quality components Professional wiring harness, robust connectors and temperature-resistant silicone hoses ensure long service life. IEC Kit Contents – DUCATI Multistrada V4 1. Electric water pump MT-WP110 2. IEC control unit MT-ECU-DM60 3 Carbon water pump bracket 4 ECU bracket 5. Silicone coolant hoses (inlet) 6 Silicone coolant hoses (outlet) 4. Plug-and-play wiring harness 5. LED status ring Quick Installation Overview 1. Remove fairings and drain the coolant. 2. Remove OEM hoses and install MONZATECH hoses including the pump (observe flow direction). 3. Mount the IEC control unit above the battery and connect all wiring according to the manual. 4. Install the LED status ring on the handlebar and route the cable neatly. 5. Refill the cooling circuit and bleed thoroughly. 6. 📄 Installation manual / Download Quick Specs Vehicle Ducati Panigale Multistrada V4 Control Proportionally controlled for pump and fan – automatic temperature management Installation Plug-and-play, vehicle-specific wiring harness, high-temperature-resistant silicone hoses Maintenance Fully automatic operation, no manual adjustment required Note Never run the pump dry – bleed thoroughly after filling Important: The IEC system continues to operate after engine OFF and prevents overheating by active after-cooling. Compatible with Ducati Panigale Multistrada V4. Brand and model names are used for identification purposes only.