IRC Blipper Yamaha VMAX 09-20

Note: Only valid for orders without a simultaneous purchase of a related blipper system. IRC Upkit forYamaha models without OEM-Quickshift function. Installation notice IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most. Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles: Ignition coils Throttle position sensor (TPS) Gear position sensor Throttle grip / twist grip sensor Demand sensor Fuel injectors Equally important during installation: Work carefully — seat all connectors fully, keep contacts dry and corrosion-free, observe torque values. Mind the cable management — route wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly. Follow the IRC installation instructions — sequence, pin assignment and operating parameters are product-specific. Be able to read fault codes — most irregularities after a modification can be narrowed down within minutes. A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable. If you are unsure, have the installation done by a specialist workshop or an experienced racing mechanic — and feel free to contact us with technical questions. These products are intended exclusively for racing and track use and are not approved for use on public roads. Damage caused by improper installation, deviating settings or inadequate cable management is excluded from the manufacturer’s warranty. Warranty conditions This product is covered by the international warranty conditions of IRC S.r.l. Download the IRC international warranty conditions (PDF)

IRC Up- and Downshift Blipper/Quickshifter For models without a factory quickshifter function, please select NO in the option above: “OEM quickshifter installed?” (The UPKIT will be added automatically). During downshifting, the IRC control unit generates a gear- and RPM-specific throttle blip. This eliminates the need to use the clutch when downshifting. The bidirectional IRC shift sensor also processes the signal for the original ECU’s quickshifter function – for both upshifts and downshifts. All relevant parameters are individually adjustable: Shift force for upshifts Shift force for downshifts Blip duration (time) Blip threshold (trigger force) Sensor direction: pull / push These settings can be optimally adapted to your application (e.g. street or racetrack) and to the geometry of your rearset setup. The installation kit includes a preassembled wiring harness and all required linkage hardware. It is completely plug-and-play and fits any rearset with minimal modification – including setups with reverse shifting. Not road legal (no ABE approval)2-year manufacturer warranty Installation notice IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most. Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles: Ignition coils Throttle position sensor (TPS) Gear position sensor Throttle grip / twist grip sensor Demand sensor Fuel injectors Equally important during installation: Work carefully — seat all connectors fully, keep contacts dry and corrosion-free, observe torque values. Mind the cable management — route wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly. Follow the IRC installation instructions — sequence, pin assignment and operating parameters are product-specific. Be able to read fault codes — most irregularities after a modification can be narrowed down within minutes. A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable. If you are unsure, have the installation done by a specialist workshop or an experienced racing mechanic — and feel free to contact us with technical questions. These products are intended exclusively for racing and track use and are not approved for use on public roads. Damage caused by improper installation, deviating settings or inadequate cable management is excluded from the manufacturer’s warranty. Warranty conditions This product is covered by the international warranty conditions of IRC S.r.l. Download the IRC international warranty conditions (PDF)