€689.00
Available, delivery time: 1-2 weeks
IRC Blipper Harley Davidson BIG Bore Engines is the IRC up- and down-shift blipper (quickshifter with auto-blip) for HARLEY DAVIDSON BIGBORE >2100 (2008–2026) with ride-by-wire: gear- and RPM-selective throttle blip on downshifts, no more clutch pulling, quickshift on upshifts, shift force, blip duration and blip threshold freely adjustable.
- TypeBlipperUp- & downshift with auto-blip
- Scope of deliveryComplete systemControl unit, shift sensor, wiring harness
- Model years2008–2026Harley-Davidson
| Fits | HARLEY DAVIDSON BIGBORE >2100 2008–2026 |
|---|---|
| IRC numbers | IRC-BLIP-HDBB |
IRC Up- and Downshift Blipper/Quickshifter
- Downshiftingwithout the clutchgear- and RPM-specific blip
- Individually adjustableover 10 parametersincluding shift force for upshifts and downshifts, blip duration (time), ignition cut time, sensor direction pull/push
- Installationdetailedcomprehensive installation and setup instructions for experienced home mechanics
- Warranty2 yearsManufacturer's warranty
1Function
When downshifting, the IRC control unit delivers a gear- and RPM-dependent throttle blip, eliminating the need to use the clutch when shifting down.
The IRC shift sensor, designed for both push and pull directions, also sends the necessary signal for the factory ECU’s quickshifter functionality.
2Adjustable parameters
All key parameters can be adjusted individually, e.g.:
- Shift pressure for upshifts
- Shift pressure for downshifts
- Blip duration (time)
- Blip threshold (trigger force)
- Sensor direction: push / pull
These parameters can be optimally tailored to the individual riding style.
3Installation
The installation kit, including pre-assembled wiring harness and linkage hardware, is fully plug-and-play and fits any rearset with minimal modifications – even in setups with reverse shifting.
4Installation notice
IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most.
Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles:
- Ignition coils
- Throttle position sensor (TPS)
- Gear position sensor
- Throttle grip / twist grip sensor
- Demand sensor
- Fuel injectors
Equally important during installation
- Work carefullySeat all connectors fully, keep contacts dry and corrosion-free, observe torque values.
- Mind the cable managementRoute wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly.
- Follow the IRC installation instructionsSequence, pin assignment and operating parameters are product-specific.
- Be able to read fault codesMost irregularities after a modification can be narrowed down within minutes.
A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable.
5Warranty conditions
Properties
| IRC productcategory | IRC Blipper |
|---|---|
| THROTTLE BY WIRE | YES |
Compatibility
| Brand | Model | Years |
|---|---|---|
| Harley-Davidson | HARLEY DAVIDSON BIGBORE >2100 | 2008–2026 |


