Skip to main content Skip to search Skip to main navigation
Go to homepage

IRC Blipper Yamaha R1 07-14

IRC Blipper Yamaha R1 07-14 – with OEM quickshifter is the IRC up- and down-shift blipper (quickshifter with auto-blip) for the YAMAHA YZF-R1 / R1 998 (2007–2014) with ride-by-wire: gear- and RPM-selective throttle blip on downshifts, no more clutch pulling, quickshift on upshifts, shift force, blip duration and blip threshold freely adjustable.

  • TypeBlip­perUp- & downshift with auto-blip
  • Scope of deliveryCom­plete systemControl unit, shift sensor, wiring harness
  • Model years2007–2014Yamaha
FitsYAMAHA YZF-R1 / R1 998 2007–2014
IRC numbersIRC-BLIP-YAMR107-14.1

IRC Up- and Downshift Blipper/Quickshifter

  • Downshiftingwithout the clutchgear- and RPM-specific blip
  • Adjustable5 para­met­erscan be tuned to your riding style
  • InstallationPlug & Playincl. wiring harness
  • Warranty2 yearsManufacturer's warranty

1Function

When downshifting, the IRC control unit delivers a gear- and RPM-dependent throttle blip, eliminating the need to use the clutch when shifting down.

The IRC shift sensor, designed for both push and pull directions, also sends the necessary signal for the factory ECU’s quickshifter functionality.

2Adjustable parameters

All key parameters can be adjusted individually:

  • Shift pressure for upshifts
  • Shift pressure for downshifts
  • Blip duration (time)
  • Blip threshold (trigger force)
  • Sensor direction: push / pull

These parameters can be optimally tailored to the individual riding style.

3Installation

The installation kit, including pre-assembled wiring harness and linkage hardware, is fully plug-and-play and fits any rearset with minimal modifications – even in setups with reverse shifting.

4Installation notice

IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most.

Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles:

  • Ignition coils
  • Throttle position sensor (TPS)
  • Gear position sensor
  • Throttle grip / twist grip sensor
  • Demand sensor
  • Fuel injectors

Equally important during installation

  • Work carefullySeat all connectors fully, keep contacts dry and corrosion-free, observe torque values.
  • Mind the cable managementRoute wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly.
  • Follow the IRC installation instructionsSequence, pin assignment and operating parameters are product-specific.
  • Be able to read fault codesMost irregularities after a modification can be narrowed down within minutes.

A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable.

5Warranty conditions

Properties

IRC productcategory IRC Blipper
THROTTLE BY WIRE YES

Compatibility

BrandModelYears
YamahaYAMAHA YZF-R1 / R1 9982007–2014

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

PRODUKTE YAMAHA R1

Flywheel puller original rotor Yamaha R1 09-14
Flywheel puller original rotor Yamaha R1 09-14

Original Rotor Puller Yamaha R1 09-14 is the special tool for removing the standard alternator rotor on the YAMAHA YZF-R1 / R1 998 (2009–2014) – required to fit the BDK racing alternator kit or a replacement rotor without damaging the rotor or crankshaft stub. Type Rotor puller Special tool for the standard rotor Scope of delivery 1 rotor puller with model-specific thread Model years 2009–2014 Yamaha Fits YAMAHA YZF-R1 / R1 998 2009–2014 Part number RG-ACC-ABZ_YAM_R1_09-14 Flywheel puller original rotor Yamaha R1 09-14 1Application Removal of the standard alternator rotor – a prerequisite for fitting the BDK racing alternator kit Fitting a replacement rotor without damaging the rotor or the crankshaft stub 2Scope of delivery 1 rotor puller with model-specific thread The thread is model-specific – please check your model and year under "Fits".

Regular price: €49.90
IRC ELECTROMECHANICAL Blipper MGC
IRC ELECTROMECHANICAL Blipper MGC

IRC ELECTROMECHANICAL Blipper MGC is the IRC up- and downshift blipper (quickshifter with auto-blip): gear- and RPM-selective throttle blip on downshifts, no more clutch use required, quickshift on upshifts, shift force, blip duration and blip threshold freely adjustable. Type Blip­per for motorcycles without Ride-by-Wire, up- & downshift with auto-blip Scope of delivery Com­plete system Control unit, shift sensor, wiring harness, actuator, servo throttle cable, shift relay Model years 1987–2026 Honda · Kawasaki · Suzuki · Triumph · Yamaha Electromechanical downshift Blipper & Advanced Quickshifter for almost all non-ride-by-wire motorcycles. Downshiftingwithout the clutchgear- and RPM-specific blip Adjustable5 para­met­erscan be tuned to your riding style Warranty2 yearsManufacturer's warranty Please enter the exact model name and year of manufacture in the "Order and delivery notes" field at checkout. 1Compatible models (examples) Honda CBR600F (1987–2013) Honda CBR600RR (2003–2016) Honda Fireblade CBR900RR (1992–2003) Honda Fireblade CBR1000RR (2004–2016) Kawasaki ZX-6R incl. 636 (1995–2026) Kawasaki ZX-7R (1996–2003) Kawasaki ZX-10R (2004–2014) Suzuki GSX-R600 (from 1992) Suzuki GSX-R750 (from 1985) Suzuki GSX-R1000 (2001–2016) Triumph Daytona 675R (from 2013) Yamaha YZF-R6 (1999–2005) Yamaha YZF-R1 (1998–2006) 2Included in the box IRC control unit with display Shift sensor (load cell) for pull and push direction Shift rod Actuator incl. bracket Shift relay with relay wiring harness Servo throttle cable throttle body – actuator – twist grip 3Function When downshifting, the IRC control unit triggers a throttle blip that is dependent on gear and engine speed. This means there is no need to pull the clutch – perfect for precise, sporty riding. The IRC shift sensor is designed for both push and pull directions and, in parallel, sends the necessary signal to the original ECU for the Quickshifter function. 4Adjustable parameters All parameters individually adjustable: Shift force when upshifting Shift force when downshifting Blip duration Trigger rpm (blip threshold) Sensor mode: pull / push These parameters can be optimally matched to your individual riding style. Not road legal (no ABE approval) 5Installation notice IRC components interface precisely with your motorcycle's engine management and sensors. When correctly installed, they deliver reliable performance for years – so here is a quick summary of the essentials up front. Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles: Ignition coils Throttle position sensor (TPS) Gear position sensor Throttle / twist grip sensor Demand sensor Fuel injectors Special feature of the MGC: mechanical installation Unlike our other IRC blippers and quickshifters, the MGC also requires mechanical components to be fitted and adjusted – above all the actuator with blipper cylinder and throttle cables. This demands considerably more practical skill and experience: Throttle twist grip with mechanical stops – retrofit if necessary Secure the blipper cylinder and actuator firmly – no moving parts within the range of movement Route the cables without kinks, cut the universal cable to length, leave 1 mm of play at the actuator Set the actuator stroke to 15–18 % opening using the throttle position signal (TPS) and a voltmeter Readjust the throttle free play and return cable – everything must work as it does on the standard bike Additionally solder the cable clamps and crimped connections Fit the shift sensor load-neutral using four nuts Equally important during installation Work carefullyMake sure connectors are fully latched, keep contacts dry and free of corrosion, and observe the torque specifications. Pay attention to cable routingRoute cables so they cannot chafe, leave enough slack for movement, keep them away from hot and moving parts, and secure them neatly. Follow the IRC installation instructionsThe sequence, pin assignment and operating parameters are specific to each product. Be able to read out fault codesThis lets you narrow down most issues after a conversion within minutes. A good understanding of the bike's other electronics and of how its components work together is also helpful. If you are unsure, have the installation carried out by a specialist workshop or an experienced race mechanic — we are happy to help with any technical questions. These products are intended exclusively for racing and circuit use and are not approved for use on public roads. Damage caused by improper installation, deviating settings or inadequate cable routing is excluded from the manufacturer's warranty. 6Warranty Conditions The international warranty conditions of IRC S.r.l. apply to this product. Download IRC warranty conditions (PDF)2-year manufacturer's warranty

Regular price: €820.00
SPARE Magnet Rotor Yamaha R1 09-14
SPARE Magnet Rotor Yamaha R1 09-14

Replacement Magnetic Rotor Yamaha R1 09-14 is the BDK replacement rotor for the Racing Alternator Kit for the YAMAHA YZF-R1 / R1 998 (2009–2014): identical to the rotor included in the kit, lightweight and small in diameter – for replacement after a crash or wear, without having to purchase the complete kit again. Type Rotor Spare part, identical to the kit rotor Scope of delivery 1 rotor Stator and regulator sold separately Model years 2009–2014 Yamaha Fits YAMAHA YZF-R1 / R1 998 2009–2014 Part number RG-SPP-ROT_YAM_R1_09-14 SPARE Magnet Rotor Yamaha R1 09-14 1Application Replacement after a crash or wear – identical to the rotor from the BDK racing alternator kit No need to buy the complete kit again 2Scope of delivery 1 rotor Stator and regulator/rectifier are available separately The two-piece BDK rotor puller (available separately) is used to remove the rotor.

Regular price: €341.00
Vesrah VD-248 RJL-XX
Vesrah VD-248 RJL-XX
COMPOUND: RJL-XX

Vesrah VD-248 RJL-XX is the motorcycle racing front brake pad in the VD-248 pad shape with Compound RJL-XX: a softer initial bite with strong performance in the racing temperature range, very long-lasting and stable over race distances – for advanced riders. Pad shape VD-248 Racing · front Compound RJL-XX Sintered metal Scope of delivery 2 pads sufficient for one brake caliper Suitable for, among others Yamaha YZF-R1 , Yamaha YZF-R6, R1, R6 Vesrah numbers VD-248RJLXX · VD248XX · VD-248XX VESRAH racing brake pads are specifically developed for use in motorcycle racing under all weather conditions. They offer outstanding temperature stability, are available in different compounds for various braking preferences and riding styles, and feature an especially stiff backing plate to ensure maximum braking precision, optimal brake pressure control, and free wheel rotation. 1Features Racing in any weatherEven in wet conditions, full braking power is restored instantly. The metal-on-metal friction generates immediate heat – water evaporates instantly, completely fade-free. Stability across the full temperature rangeSintered metal pads are designed to maintain their coefficient of friction consistently across the entire racing temperature range – no softening, no outgassing. Vesrah's specially developed steel backing plate also provides maximum shape stability. Customized braking behavior – tailored to your riding styleWhether you accelerate early and aggressively or brake late and hard into corners: Vesrah pads offer optimized compounds for different riding techniques, allowing maximum control based on your personal riding style. 2Vesrah Racing Compounds – Overview of Properties Vesrah RJL-XX Softer initial bite with strong effect in the temperature range Very durable – suitable for advanced riders Especially stable over race distances 3Compatible bikes and brake calipers 4Compound comparison Classification according to Vesrah CompoundInitial biteBraking powerProgressionDurabilitySuitable for RJLvery gentlegoodsmooth and evenvery highbeginners to advanced riders RJL-SSstronghighlinearvery highadvanced riders to professionals RJL-XXgentlevery highprogressive – strong and stable once warmed upvery highadvanced riders to professionals RJL-ZZstrongvery highlinearmediumsmall to medium-sized bikes RJL-RXvery strongvery highhigh braking power immediatelyhighall engine capacity classes and rider levels Classification based on Vesrah's compound descriptions (Racing Brake Pads, vesrah.tokyo) and the Vesrah braking torque build-up diagram, as of 11/2026. Braking torque build-up 0.80.60.40.20µTime → RJL (derived)RJL-SSRJL-XXRJL-ZZRJL-RX (derived) Friction coefficient µ over time when braking (principle). RJL-SS, RJL-ZZ and RJL-XX according to the Vesrah diagram; RJL and RJL-RX shown dashed, derived from the manufacturer's ratings for initial bite and braking power.

Variants from €89.25
Regular price: €93.00
Vesrah VD-277 RJL-XX
Vesrah VD-277 RJL-XX
COMPOUND: RJL-XX

Vesrah VD-277 RJL-XX is the motorcycle racing front brake pad in the VD-277 pad shape with Compound RJL-XX: a softer initial bite with strong performance in the racing temperature range, very long-lasting and stable over race distances – for advanced riders. Pad shape VD-277 Racing · front Compound RJL-XX Sintered metal Scope of delivery 4 pads sufficient for one brake caliper Suitable for, among others Yamaha R1 YZF-R1 (RN24J), Race Base 14BA & 14BJ & 1KBA & 1KBS & 4C87 Vesrah numbers VD-277RJLXX · VD277XX · VD-277XX VESRAH racing brake pads are specifically developed for use in motorcycle racing under all weather conditions. They offer outstanding temperature stability, are available in different compounds for various braking preferences and riding styles, and feature an especially stiff backing plate to ensure maximum braking precision, optimal brake pressure control, and free wheel rotation. 1Features Racing in any weatherEven in wet conditions, full braking power is restored instantly. The metal-on-metal friction generates immediate heat – water evaporates instantly, completely fade-free. Stability across the full temperature rangeSintered metal pads are designed to maintain their coefficient of friction consistently across the entire racing temperature range – no softening, no outgassing. Vesrah's specially developed steel backing plate also provides maximum shape stability. Customized braking behavior – tailored to your riding styleWhether you accelerate early and aggressively or brake late and hard into corners: Vesrah pads offer optimized compounds for different riding techniques, allowing maximum control based on your personal riding style. 2Vesrah Racing Compounds – Overview of Properties Vesrah RJL-XX Softer initial bite with strong effect in the temperature range Very durable – suitable for advanced riders Especially stable over race distances 3Compatible bikes and brake calipers 4Compound comparison Classification according to Vesrah CompoundInitial biteBraking powerProgressionDurabilitySuitable for RJLvery gentlegoodsmooth and evenvery highbeginners to advanced riders RJL-SSstronghighlinearvery highadvanced riders to professionals RJL-XXgentlevery highprogressive – strong and stable once warmed upvery highadvanced riders to professionals RJL-ZZstrongvery highlinearmediumsmall to medium-sized bikes RJL-RXvery strongvery highhigh braking power immediatelyhighall engine capacity classes and rider levels Classification based on Vesrah's compound descriptions (Racing Brake Pads, vesrah.tokyo) and the Vesrah braking torque build-up diagram, as of 11/2026. Braking torque build-up 0.80.60.40.20µTime → RJL (derived)RJL-SSRJL-XXRJL-ZZRJL-RX (derived) Friction coefficient µ over time when braking (principle). RJL-SS, RJL-ZZ and RJL-XX according to the Vesrah diagram; RJL and RJL-RX shown dashed, derived from the manufacturer's ratings for initial bite and braking power.

Variants from €103.50
Regular price: €119.00
Tip
Vesrah VD-9031
Vesrah VD-9031

Vesrah VD-9031 is the pad shape for the front motorcycle racing brake pad, available from us in the compounds RJL, RJL-RX, RJL-SS, RJL-XX and RJL-ZZ. Pad shape VD-9031 Racing · front Compound 5 com­pounds RJL · RJL-SS · RJL-XX · RJL-ZZ · RJL-RX Scope of delivery 2 pads sufficient for one brake caliper Please select the compound above. Suitable for, among others RSV4, Tuono V4 , Ducati Panigale R/S V4, Brembo M4, M50, Stylema Vesrah numbers VD-9031RJL · VD-9031RX · VD-9031SS · VD-9031XX · VD-9031ZZ VESRAH racing brake pads are specifically developed for use in motorcycle racing under all weather conditions. They offer outstanding temperature stability, are available in different compounds for various braking preferences and riding styles, and feature an especially stiff backing plate to ensure maximum braking precision, optimal brake pressure control, and free wheel rotation. 1Features Racing in any weatherEven in wet conditions, full braking power is restored instantly. The metal-on-metal friction generates immediate heat – water evaporates instantly, completely fade-free. Stability across the full temperature rangeSintered metal pads are designed to maintain their coefficient of friction consistently across the entire racing temperature range – no softening, no outgassing. Vesrah's specially developed steel backing plate also provides maximum shape stability. Customized braking behavior – tailored to your riding styleWhether you accelerate early and aggressively or brake late and hard into corners: Vesrah pads offer optimized compounds for different riding techniques, allowing maximum control based on your personal riding style. 2Vesrah Racing Compounds – Overview of Properties Vesrah RJL Very smooth, controlled initial bite Ideal for beginners and intermediate riders Especially durable and consistent Proven in endurance races Vesrah RJL-SS Very strong initial bite High endurance – ideal for advanced riders More direct feedback than XX Very popular – often sold out Vesrah RJL-XX Softer initial bite with strong effect in the temperature range Very durable – suitable for advanced riders Especially stable over race distances Vesrah RJL-ZZ Very strong initial bite Good control and modulation Medium durability – ideal for light/midweight bikes Newest pad generation for maximum performance from the first brake Vesrah RJL-RX Very strong initial bite Very good control and modulation High durability – ideal for all category bikes Newest pad generation for maximum performance from the first brake 3Compatible bikes and brake calipers 4Compound comparison Classification according to Vesrah CompoundInitial biteBraking powerProgressionDurabilitySuitable for RJLvery gentlegoodsmooth and evenvery highbeginners to advanced riders RJL-SSstronghighlinearvery highadvanced riders to professionals RJL-XXgentlevery highprogressive – strong and stable once warmed upvery highadvanced riders to professionals RJL-ZZstrongvery highlinearmediumsmall to medium-sized bikes RJL-RXvery strongvery highhigh braking power immediatelyhighall engine capacity classes and rider levels Classification based on Vesrah's compound descriptions (Racing Brake Pads, vesrah.tokyo) and the Vesrah braking torque build-up diagram, as of 11/2026. Braking torque build-up 0.80.60.40.20µTime → RJL (derived)RJL-SSRJL-XXRJL-ZZRJL-RX (derived) Friction coefficient µ over time when braking (principle). RJL-SS, RJL-ZZ and RJL-XX according to the Vesrah diagram; RJL and RJL-RX shown dashed, derived from the manufacturer's ratings for initial bite and braking power.

Regular price: From €87.20
Vesrah XD-163/2
Vesrah XD-163/2

Vesrah XD-163/2 is the pad shape for the motorcycle racing brake pad rear and is available from us in the compounds B (WIN-B, grey), E (WIN-E, brown), P (WIN-P, red) and S (WIN-S, blue). Pad shape XD-163/2 Racing · rear Compound 4 com­pounds B · E · P · S Scope of delivery 2 pads sufficient for one rear brake caliper Select the compound above. Suitable for, among others Yamaha R1 YZF-R1 (RN24J, 14BA, 14BJ, 1KBA, 1KBS, 4C87) Vesrah numbers XD-163/2B · XD-163/2E · XD-163/2P · XD-163/2S VESRAH WIN racing brake pads have been specifically designed for controlled and safe use in rear wheel braking. They impress with outstanding control and stability. They are available in various compounds for different braking preferences and riding styles for maximum braking precision and optimal brake pressure control. 1VESRAH WIN RACEPACE brake pads for rear wheel braking Stable line control in cornersThanks to finely adjustable rear braking No jerkingConsistent braking behavior even at high temperatures Four different compoundsChoose the optimal material for your riding style Better corner exitUse the tighter line with more RPM on the straight Trust the rear brakeAnd take your riding skills to the next level 2Vesrah Racing Compounds – Overview of Properties Vesrah WIN B-Pads Beginner? Don't like using the rear brake? With Vesrah XD B-Pads, rear braking is much more comfortable and safer, without risk of locking up. B-Pads are recommended for motorcycles with 250cc or smaller displacement engines Vesrah WIN E-Pads E-Pads are for experienced riders who have a lot of experience with rear braking. The brake material of the E-Pads for rear braking has transparent brake force development, giving you greater control. E-Pads are recommended for motorcycles with 600cc or larger engines. Vesrah WIN P-Pads P-Pads are perfect for experienced riders who already have a lot of experience with rear brake force application. P-Pads have increased braking power compared to the E-Pads (BROWN). Vesrah WIN S-Pads For intensive use of the rear brake and motorcycles with very powerful engines. Highest braking power of all XD-Pads. 3Compatible bikes and brake calipers 4Compound comparison Braking effectiveness according to Vesrah CompoundBraking effectivenessRecommended for WIN B-Padslowbeginners, bikes up to 250 cc WIN E-Padsmediumexperienced riders, bikes from 600 cc WIN P-Padshighexperienced riders who want more braking power than with E WIN S-Padsvery highintensive use of the rear brake and very powerful engines Braking effectiveness in levels 1 to 4 out of 5 according to the Vesrah "Braking Effectiveness" chart (WIN Rear Pads); recommendations taken from the compound descriptions.

Regular price: €92.50
Vesrah XD-174
Vesrah XD-174

Vesrah XD-174 is the pad shape for the rear motorcycle racing brake pad, available from us in compounds B (WIN-B, grey), E (WIN-E, brown), P (WIN-P, red) and S (WIN-S, blue). Pad shape XD-174 Racing · rear Compound 4 com­pounds B · E · P · S Scope of delivery 2 pads sufficient for one rear brake caliper Please select the compound above. Suitable for, among others CBR1000RR, CBR600RR, ZX-10R, GSX-R1000, YZF-R1(M), YZF-R6, YZF-R7 Vesrah numbers XD-174B · XD-174E · XD-174P · XD-174S VESRAH WIN racing brake pads have been specifically designed for controlled and safe use in rear wheel braking. They impress with outstanding control and stability. They are available in various compounds for different braking preferences and riding styles for maximum braking precision and optimal brake pressure control. 1VESRAH WIN RACEPACE brake pads for rear wheel braking Stable line control in cornersThanks to finely adjustable rear braking No jerkingConsistent braking behavior even at high temperatures Four different compoundsChoose the optimal material for your riding style Better corner exitUse the tighter line with more RPM on the straight Trust the rear brakeAnd take your riding skills to the next level 2Vesrah Racing Compounds – Overview of Properties Vesrah WIN B-Pads Beginner? Don't like using the rear brake? With Vesrah XD B-Pads, rear braking is much more comfortable and safer, without risk of locking up. B-Pads are recommended for motorcycles with 250cc or smaller displacement engines Vesrah WIN E-Pads E-Pads are for experienced riders who have a lot of experience with rear braking. The brake material of the E-Pads for rear braking has transparent brake force development, giving you greater control. E-Pads are recommended for motorcycles with 600cc or larger engines. Vesrah WIN P-Pads P-Pads are perfect for experienced riders who already have a lot of experience with rear brake force application. P-Pads have increased braking power compared to the E-Pads (BROWN). Vesrah WIN S-Pads For intensive use of the rear brake and motorcycles with very powerful engines. Highest braking power of all XD-Pads. 3Compatible bikes and brake calipers 4Compound comparison Braking effectiveness according to Vesrah CompoundBraking effectivenessRecommended for WIN B-Padslowbeginners, bikes up to 250 cc WIN E-Padsmediumexperienced riders, bikes from 600 cc WIN P-Padshighexperienced riders who want more braking power than with E WIN S-Padsvery highintensive use of the rear brake and very powerful engines Braking effectiveness in levels 1 to 4 out of 5 according to the Vesrah "Braking Effectiveness" chart (WIN Rear Pads); recommendations taken from the compound descriptions.

Regular price: €92.50
Yamaha R1 Racing Alternator Kit 09-14
Yamaha R1 Racing Alternator Kit 09-14

Yamaha R1 Racing Alternator Kit 09-14 is the ready-to-fit BDK Racing alternator kit for the YAMAHA YZF-R1 / R1 998 (2009–2014): a significantly lighter rotor with a smaller diameter, resulting in reduced gyroscopic forces on the crankshaft, faster engine speed matching on downshifts and easier direction changes in chicanes – built for the racetrack and racing conversions. Type BDK Racing Racing alternator kit, ready to fit Scope of delivery Com­plete kit Rotor, stator, regulator/rectifier · optional: Comfort relay Model years 2009–2014 Yamaha Fits YAMAHA YZF-R1 / R1 998 2009–2014 Part numbers RG-YAM-R1-09-14 Ready-to-fit racing alternator kit from BDK Race Engineering for the Yamaha R1 (2009–2014): lightweight magnet rotor, stator with mounting plate and a dedicated regulator/rectifier, pre-assembled with all connectors. Significantly lighter than the standard system and more powerful than typical race kits – for sharper throttle response, reduced gyroscopic forces and more power across the whole rev range. Rotor diameter45 mmStandard approx. 120 mm Rotor weight198 g78% lighter Peripheral speed120 km/hat 14,000 rpm, standard approx. 320 km/h Power gainapprox. 3–5 hpdepending on engine 1What you will feel on track Quicker direction changesLess rotating mass on the crankshaft means reduced gyroscopic forces – the bike is easier to flick over, especially through chicanes and S-bends. Stability under brakingEngine speed matches much faster when downshifting: quicker downshifts, a calmer rear end, more time on turn-in and later braking points. More direct throttle responseThe engine revs more freely and responds more immediately to the throttle – noticeable when accelerating out of corners. 2Why the small rotor makes such a difference What matters is not only the weight of the rotor, but also where that weight sits. The BDK rotor weighs just 198 g, 78% less than the standard rotor at 890 g, and has a diameter of only 45 mm instead of around 120 mm. At 14,000 rpm, a standard rotor reaches a peripheral speed of around 320 km/h, while the BDK rotor reaches only around 120 km/h. A considerably smaller mass that also moves much more slowly can be accelerated and slowed down far more quickly – and you will feel exactly that in throttle response, acceleration and downshifting. FeatureStandard alternatorBDK kit Rotor diameterStandard alternatorapprox. 120 mmBDK kit45 mm Rotor weightStandard alternator890 gBDK kit198 g Peripheral speed at 14,000 rpmStandard alternatorapprox. 320 km/hBDK kitapprox. 120 km/h Regulator/rectifierStandard alternatorStandard regulator, converts excess power into heatBDK kitBDK regulator/rectifier with cut-off logic 3More than a typical race kit On fuel-injected bikes, a total-loss system without an alternator is not an option because of the fuel pump and injectors. The standard alternator, however, is designed for lighting and road use and delivers far more than a race bike needs – this is where weight can be saved on the crankshaft. Typical race kitsSmall rotor, few windings and the standard regulator/rectifier: usable output is only available at high revs, and excess current is converted into heat in the regulator/rectifier. BDK windingMany turns of fine wire deliver strong, consistent charging output even at medium revs. BDK regulator/rectifier with cut-off logicOnce the target voltage is reached, the regulator/rectifier disconnects generation. The crankshaft is not loaded unnecessarily and the regulator/rectifier stays considerably cooler. Only operate BDK racing alternators with the supplied BDK regulator/rectifier!With the standard regulator/rectifier, the alternator would be under constant load and the winding would overheat. 4Technical details Three-phase alternator with nine poles and six internal permanent magnets, designed for 4,000 to 17,000 rpm. Stator lamination stack made of iron-cobalt alloy (49Fe-49Co-2V) instead of silicon steel: around 30% higher flux density, 0.15 mm lamination thickness, iron losses reduced by a further 60%. High-coercivity magnets and a high-strength steel retaining band to withstand centrifugal forces up to 18,000 rpm. Winding made of scratch-resistant inverter wire to cope with the fast voltage spikes at up to 580 Hz. 5Scope of delivery and versions Lightweight rotor (45 mm, 198 g) Stator with mounting plate and housing, fixing material BDK regulator/rectifier with cut-off logic Pre-assembled cables and connectors Comfort relay (optional, +69 EUR)switches the regulator's power supply with the ignition, so you don't need to disconnect anything after riding 6Battery and accessories A racing alternator only starts charging at approx. 4,500 rpm and deliberately delivers less charging output than the standard system. The battery therefore needs reserves: LiFePO4 battery with at least 7.8 Ah, ideally 10.4 Ah – for example our RACEPACE LiFePO4 Endurance Power. We advise against lithium-polymer (LiPo) batteries with a racing alternator. To remove the standard rotor you will need a flywheel puller: Flywheel puller original rotor Yamaha R1 09-14. 7Important installation notice for racing alternator kits from BDK Race Engineering A BDK racing alternator kit replaces your motorcycle's rotor, stator and regulator/rectifier with a significantly lighter unit designed for racing use. This provides a noticeable reduction in rotating mass – but requires careful installation and involves changed operating behaviour. To ensure your kit works reliably from the outset, here is an overview of the most important points. Who should carry out the installation? Installation should be carried out by an experienced mechanic – someone who is confident working on the engine and the vehicle's electrical system. Specifically, this includes: Removal of the alternator cover, flywheel/rotor, starter clutch and stator, including securing the Woodruff key (rotor key) Removal and refitting of the ignition pulse sensor (pickup), maintaining the original installation position Working with thread locker and specified torque values according to the manufacturer's instructions Cleaning sealing surfaces, correctly fitting new gaskets and locating dowels, and sealing the cable grommet Professional crimping of the spade connectors and fitting of the connector housing Connection and fusing of the regulator/rectifier in the vehicle electrical system, plus measurements with a multimeter in AC and DC What matters during installation Thread locker is mandatoryAll screws must be fitted with thread locker and tightened to the specified torque. Failures have already occurred due to missing thread locker – this is the most common avoidable mistake. Only use the supplied regulatorThe standard regulator must never be used with a racing alternator. The regulator body must have a permanently clean earth connection. Regulator mountingOn a flat metal surface exposed to airflow, away from exhaust heat. One mounting point bolted, the second secured with a cable tie. Pay attention to cable managementRoute the stator and pickup wires and secure them with the original clamps as done from the factory – free of chafing, with sufficient movement clearance, and not pinched. A chafed cable causes a short to earth. ConnectorsEvery spade connector must click audibly into place. The order of the three stator wires is not important – a secure fit is what counts. Fusing and switched positiveAn intact fuse (30 or 35 A depending on kit) must be fitted in the positive line. The signal wire must be connected to a switched 12V positive supply so that no standing current flows when parked. Follow the original installation instructionsSequence, torque values, gasket part numbers and cable lengths are model-specific and are detailed in the enclosed BDK instructions. What changes during operation A racing alternator deliberately delivers less charging output than the standard system. Depending on the kit, it only starts charging from around 3,000 to 5,000 rpm; prolonged running at lower engine speeds will discharge the battery. This results in three fixed rules: Always start with a fully charged battery, using at least a 7.8 Ah LiFePO4 battery, ideally 10.4 Ah. After each session, remove the fuse at the regulator, disconnect the 12V supply, or use a battery disconnect switch – otherwise deep discharge may occur. Never start or run the bike with the battery disconnected or the regulator unplugged. This will damage the alternator. The green LED on the regulator indicates that charging is taking place – a useful quick check before and after each session. Diagnostics The installer should be able to independently check with a multimeter: the fuse and switched positive supply, continuity between the stator pins (present between each other, none to earth), the AC voltage between the stator pins at a constant engine speed, and the charging voltage at the battery. This allows almost all faults to be narrowed down within a few minutes – often to something minor such as a blown fuse or a connector that hasn't clicked into place. The specific target values can be found in the troubleshooting section of the enclosed instructions. If you're unsureThat's not a problem – in this case, please have the installation carried out by a specialist workshop or an experienced racing mechanic. If you have any technical questions about your kit, we'll be happy to help; just get in touch with us. Please noteThis is racing equipment intended exclusively for competition and track use and is not approved for use on public roads. In its development, performance takes priority over durability; as is common for racing parts, the manufacturer provides no warranty or liability for these parts, in particular not for consequential damage. Your statutory rights against us as the seller remain unaffected. The original installation instructions from BDK Race Engineering supplied with the product are authoritative for installation.

Regular price: From €1,089.00