Skip to main content Skip to search Skip to main navigation
Go to homepage

IRC Blipper Yamaha TRACER 900 14-20 (GT)

IRC Blipper Yamaha TRACER 900 14-20 (GT) – TRACER 900 14-20, mit OEM-Quickshifter is the IRC up- and downshift blipper (quickshifter with auto-blip) for the YAMAHA MT09 / TRACER 900 / XSR 900 (2014–2020), in the version for TRACER 900 14-20 with ride-by-wire: gear- and RPM-selective throttle blip on downshifts, no more clutch pulling, quickshift on upshifts, with freely adjustable shift force, blip duration and blip threshold.

  • TypeBlip­perUp- & downshift with auto-blip
  • Scope of deliveryCom­plete systemControl unit, shift sensor, wiring harness
  • Model years2014–2020Yamaha
FitsYAMAHA MT09 / TRACER 900 / XSR 900 2014–2020
IRC numbersIRC-BLIP-YAM_TRAC_900_14-20.2

IRC Up- and Downshift Blipper/Quickshifter

  • Downshiftingwithout the clutchgear- and RPM-specific blip
  • Individually adjustableover 10 para­met­ersinclud­ing shift force for upshifts and down­shifts, blip dur­a­tion (time), igni­tion cut time, sensor dir­ec­tion pull/push
  • Installationdetailedcom­pre­hens­ive install­a­tion and setup instruc­tions for exper­i­enced home mech­an­ics
  • Warranty2 yearsManufacturer's warranty

1Function

During downshifting, the IRC control unit generates a gear- and RPM-specific throttle blip. This eliminates the need to use the clutch when downshifting.

The bidirectional IRC shift sensor also processes the signal for the original ECU’s quickshifter function – for both upshifts and downshifts.

2Adjustable parameters

All relevant parameters are individually adjustable, e.g.:

  • Shift force for upshifts
  • Shift force for downshifts
  • Blip duration (time)
  • Blip threshold (trigger force)
  • Sensor direction: pull / push

These parameters can be optimally tailored to the individual riding style.

3Installation

The installation kit includes a preassembled wiring harness and all required linkage hardware. It is completely plug-and-play and fits any rearset with minimal modification – including setups with reverse shifting.

4Installation notice

IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most.

Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles:

  • Ignition coils
  • Throttle position sensor (TPS)
  • Gear position sensor
  • Throttle grip / twist grip sensor
  • Demand sensor
  • Fuel injectors

Equally important during installation

  • Work carefullySeat all connectors fully, keep contacts dry and corrosion-free, observe torque values.
  • Mind the cable managementRoute wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly.
  • Follow the IRC installation instructionsSequence, pin assignment and operating parameters are product-specific.
  • Be able to read fault codesMost irregularities after a modification can be narrowed down within minutes.

A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable.

5Warranty conditions

Properties

IRC productcategory IRC Blipper
THROTTLE BY WIRE YES

Compatibility

BrandModelYears
YamahaYAMAHA MT09 / TRACER 900 / XSR 9002014–2020

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

PRODUKTE YAMAHA TRACER 900

EINZELKAUF: IRC QUICKSHIFT UPKIT Yamaha Blipper
EINZELKAUF: IRC QUICKSHIFT UPKIT Yamaha Blipper

IRC Quickshift-UPKIT Yamaha (Individual Purchase) is the IRC Quickshift UPKIT available as a standalone purchase for Yamaha motorcycles without a factory quickshift function: it adds upshift functionality (ignition cut on upshifts) to an already installed IRC Blipper – can only be ordered if the blipper system is not purchased at the same time. Type UPKIT Upshift function for the IRC Blipper Scope of delivery UPKIT already included when purchased with the Blipper Model years 1985–2026 Yamaha Fits YAMAHA MT09 / TRACER 900 / XSR 900 2014–2026 , YAMAHA VMAX 1198 / 1679 1985–2020 , YAMAHA YZF-R1 / R1 998 1998–2025 , YAMAHA YZF-R6 / R6 599 1999–2024 IRC numbers IRC-BLIP-YAM_UPKIT · IRC UPKIT Note: Only valid for orders without a simultaneous purchase of a related blipper system. Downshiftingwithout the clutchgear- and RPM-specific blip 1Function IRC Upkit forYamaha models without OEM-Quickshift function. 2Installation notice IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most. Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles: Ignition coils Throttle position sensor (TPS) Gear position sensor Throttle grip / twist grip sensor Demand sensor Fuel injectors Equally important during installation Work carefullySeat all connectors fully, keep contacts dry and corrosion-free, observe torque values. Mind the cable managementRoute wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly. Follow the IRC installation instructionsSequence, pin assignment and operating parameters are product-specific. Be able to read fault codesMost irregularities after a modification can be narrowed down within minutes. A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable. If you are unsure, have the installation done by a specialist workshop or an experienced racing mechanic — and feel free to contact us with technical questions. These products are intended exclusively for racing and track use and are not approved for use on public roads. Damage caused by improper installation, deviating settings or inadequate cable management is excluded from the manufacturer’s warranty. 3Warranty conditions This product is covered by the international warranty conditions of IRC S.r.l. Download the IRC international warranty conditions (PDF)

Regular price: €59.00
IRC Blipper Yamaha MT-09 (SP) 13-20
IRC Blipper Yamaha MT-09 (SP) 13-20

IRC Blipper Yamaha MT-09 (SP) 13-20 is the IRC up- and downshift blipper (quickshifter with auto-blip) for the YAMAHA MT09 / TRACER 900 / XSR 900 (2014–2020) with ride-by-wire: gear- and RPM-selective throttle blip on downshifts, no more clutch use required, quickshift on upshifts, shift force, blip duration and blip threshold freely adjustable. Type Blip­per Up- & downshift with auto-blip Scope of delivery Com­plete system Control unit, shift sensor, wiring harness Model years 2014–2020 Yamaha Fits YAMAHA MT09 / TRACER 900 / XSR 900 2014–2020 IRC numbers IRC-BLIP-YAMMT09_13-20 IRC Up- and Downshift Blipper/Quickshifter Downshiftingwithout the clutchgear- and RPM-specific blip Individually adjustableover 10 para­met­ersinclud­ing shift force for upshifts and down­shifts, blip dur­a­tion (time), igni­tion cut time, sensor dir­ec­tion pull/push Installationdetailedcom­pre­hens­ive install­a­tion and setup instruc­tions for exper­i­enced home mech­an­ics Warranty2 yearsManufacturer's warranty For models without a factory quickshifter function, please select NO in the option above: “OEM quickshifter installed?” (The UPKIT will be added automatically). 1Function During downshifting, the IRC control unit generates a gear- and RPM-specific throttle blip. This eliminates the need to use the clutch when downshifting. The bidirectional IRC shift sensor also processes the signal for the original ECU’s quickshifter function – for both upshifts and downshifts. 2Adjustable parameters All relevant parameters are individually adjustable, e.g.: Shift force for upshifts Shift force for downshifts Blip duration (time) Blip threshold (trigger force) Sensor direction: pull / push These parameters can be optimally tailored to the individual riding style. 3Installation The installation kit includes a preassembled wiring harness and all required linkage hardware. It is completely plug-and-play and fits any rearset with minimal modification – including setups with reverse shifting. Not road legal (no ABE approval) 4Installation notice IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most. Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles: Ignition coils Throttle position sensor (TPS) Gear position sensor Throttle grip / twist grip sensor Demand sensor Fuel injectors Equally important during installation Work carefullySeat all connectors fully, keep contacts dry and corrosion-free, observe torque values. Mind the cable managementRoute wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly. Follow the IRC installation instructionsSequence, pin assignment and operating parameters are product-specific. Be able to read fault codesMost irregularities after a modification can be narrowed down within minutes. A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable. If you are unsure, have the installation done by a specialist workshop or an experienced racing mechanic — and feel free to contact us with technical questions. These products are intended exclusively for racing and track use and are not approved for use on public roads. Damage caused by improper installation, deviating settings or inadequate cable management is excluded from the manufacturer’s warranty. 5Warranty conditions This product is covered by the international warranty conditions of IRC S.r.l. Download the IRC international warranty conditions (PDF)2-year manufacturer warranty

Regular price: From €689.00
IRC Blipper Yamaha XSR 900 16-20
IRC Blipper Yamaha XSR 900 16-20

IRC Blipper Yamaha XSR 900 16-20 is the IRC up- and downshift blipper (quickshifter with auto-blip) for the YAMAHA MT09 / TRACER 900 / XSR 900 (2016–2020) with ride-by-wire: gear- and RPM-selective throttle blip on downshifts, no more clutch use required, quickshift on upshifts, shift force, blip duration and blip threshold freely adjustable. Type Blip­per Up- & downshift with auto-blip Scope of delivery Com­plete system Control unit, shift sensor, wiring harness Model years 2016–2020 Yamaha Fits YAMAHA MT09 / TRACER 900 / XSR 900 2016–2020 IRC numbers IRC-BLIP-YAM_XSR_900_16-20 IRC Up- and Downshift Blipper/Quickshifter Downshiftingwithout the clutchgear- and RPM-specific blip Individually adjustableover 10 para­met­ersinclud­ing shift force for upshifts and down­shifts, blip dur­a­tion (time), igni­tion cut time, sensor dir­ec­tion pull/push Installationdetailedcom­pre­hens­ive install­a­tion and setup instruc­tions for exper­i­enced home mech­an­ics Warranty2 yearsManufacturer's warranty For models without a factory quickshifter function, please select NO in the option above: “OEM quickshifter installed?” (The UPKIT will be added automatically). 1Function During downshifting, the IRC control unit generates a gear- and RPM-specific throttle blip. This eliminates the need to use the clutch when downshifting. The bidirectional IRC shift sensor also processes the signal for the original ECU’s quickshifter function – for both upshifts and downshifts. 2Adjustable parameters All relevant parameters are individually adjustable, e.g.: Shift force for upshifts Shift force for downshifts Blip duration (time) Blip threshold (trigger force) Sensor direction: pull / push These parameters can be optimally tailored to the individual riding style. 3Installation The installation kit includes a preassembled wiring harness and all required linkage hardware. It is completely plug-and-play and fits any rearset with minimal modification – including setups with reverse shifting. Not road legal (no ABE approval) 4Installation notice IRC components interface directly with your motorcycle’s engine management and sensor systems. Installed correctly, they deliver reliable performance for years — so here is what matters most. Installation should be carried out by an experienced mechanic who is confident working with the electronic components of modern motorcycles: Ignition coils Throttle position sensor (TPS) Gear position sensor Throttle grip / twist grip sensor Demand sensor Fuel injectors Equally important during installation Work carefullySeat all connectors fully, keep contacts dry and corrosion-free, observe torque values. Mind the cable managementRoute wiring free of chafing with sufficient slack, away from hot and moving parts, and secure it properly. Follow the IRC installation instructionsSequence, pin assignment and operating parameters are product-specific. Be able to read fault codesMost irregularities after a modification can be narrowed down within minutes. A solid understanding of the rest of the motorcycle’s electronics and of how the components interact is just as valuable. If you are unsure, have the installation done by a specialist workshop or an experienced racing mechanic — and feel free to contact us with technical questions. These products are intended exclusively for racing and track use and are not approved for use on public roads. Damage caused by improper installation, deviating settings or inadequate cable management is excluded from the manufacturer’s warranty. 5Warranty conditions This product is covered by the international warranty conditions of IRC S.r.l. Download the IRC international warranty conditions (PDF)2-year manufacturer warranty

Regular price: From €689.00
Vesrah XD-163/2
Vesrah XD-163/2

Vesrah XD-163/2 is the pad shape for the motorcycle racing brake pad rear and is available from us in the compounds B (WIN-B, grey), E (WIN-E, brown), P (WIN-P, red) and S (WIN-S, blue). Pad shape XD-163/2 Racing · rear Compound 4 com­pounds B · E · P · S Scope of delivery 2 pads sufficient for one rear brake caliper Select the compound above. Suitable for, among others Yamaha R1 YZF-R1 (RN24J, 14BA, 14BJ, 1KBA, 1KBS, 4C87) Vesrah numbers XD-163/2B · XD-163/2E · XD-163/2P · XD-163/2S VESRAH WIN racing brake pads have been specifically designed for controlled and safe use in rear wheel braking. They impress with outstanding control and stability. They are available in various compounds for different braking preferences and riding styles for maximum braking precision and optimal brake pressure control. 1VESRAH WIN RACEPACE brake pads for rear wheel braking Stable line control in cornersThanks to finely adjustable rear braking No jerkingConsistent braking behavior even at high temperatures Four different compoundsChoose the optimal material for your riding style Better corner exitUse the tighter line with more RPM on the straight Trust the rear brakeAnd take your riding skills to the next level 2Vesrah Racing Compounds – Overview of Properties Vesrah WIN B-Pads Beginner? Don't like using the rear brake? With Vesrah XD B-Pads, rear braking is much more comfortable and safer, without risk of locking up. B-Pads are recommended for motorcycles with 250cc or smaller displacement engines Vesrah WIN E-Pads E-Pads are for experienced riders who have a lot of experience with rear braking. The brake material of the E-Pads for rear braking has transparent brake force development, giving you greater control. E-Pads are recommended for motorcycles with 600cc or larger engines. Vesrah WIN P-Pads P-Pads are perfect for experienced riders who already have a lot of experience with rear brake force application. P-Pads have increased braking power compared to the E-Pads (BROWN). Vesrah WIN S-Pads For intensive use of the rear brake and motorcycles with very powerful engines. Highest braking power of all XD-Pads. 3Compatible bikes and brake calipers 4Compound comparison Braking effectiveness according to Vesrah CompoundBraking effectivenessRecommended for WIN B-Padslowbeginners, bikes up to 250 cc WIN E-Padsmediumexperienced riders, bikes from 600 cc WIN P-Padshighexperienced riders who want more braking power than with E WIN S-Padsvery highintensive use of the rear brake and very powerful engines Braking effectiveness in levels 1 to 4 out of 5 according to the Vesrah "Braking Effectiveness" chart (WIN Rear Pads); recommendations taken from the compound descriptions.

Regular price: €92.50