Skip to main content Skip to search Skip to main navigation
Go to homepage

Racing Yamaha Ténéré T700 19-20 Euro 4 Electric Water Pump Kit MONZATECH

MONZATECH E-Water Pump Kit Yamaha Ténéré T700 19-20 Euro 4 Racing is the vehicle-specific MONZATECH plug-&-play kit for the electric water pump on the YAMAHA TÉNÉRÉ T700 (2019–2020, Euro 4): operation without a mechanical water pump, with the IEC control unit regulating the pump and radiator fan via its own temperature sensor proportionally to engine heat, keeping the engine within a defined temperature range, providing after-cooling once switched off, and eliminating the power loss of the standard pump – Racing version, recommended by the manufacturer exclusively for motorsport use.

  • TypeElec­tric water pumpMONZATECH kit, bike-specific
  • Scope of deliveryCom­plete kitPump, IEC control unit, wiring harness, silicone hoses
  • Model years2019–2020Yamaha
FitsYAMAHA TÉNÉRÉ T700 2019–2020
Part numbersMT-K-YT7A/4_T700_19-20_RACE · MT-K-YT7A/4

RACE-USE-ONLY engine temperature management with

  • electric water pump,
  • intelligent ECU control,
  • ATTENTION: operation is without the mechanical water pump.
  • Water pumpMT-WP110electric
  • Control unitIECMT-ECU-YT700-OP, proportionally controlled
  • InstallationPlug & Playpre-assembled for specific bike models
  • MotorcycleTénéré 700 Racing2019–2020 Euro 4

1Benefits

  • plug-&-play system – easy to install, all components included in the kit
  • optimal engine temperature control – keeps the engine within a defined temperature window
  • no power losses even under heavy use
  • proportional control of the electric pump and the radiator fan depending on engine heat
  • less system-related wear thanks to more stable thermal management
  • after-run cooling: cooling can continue even with engine OFF (system logic)
  • professional wiring harness + pressure- and temperature-resistant silicone hoses

2Key Technical Features

  • Control principleThe ECU processes coolant temperature data (CAN bus) and sensing inside the pump and controls the pump and fan as required.
  • CAN bus integrationConnection at the diagnostic plug; the splitter solution retains the function of the original connector (diagnostics / optional battery maintainer connection).
  • Racing versionDesigned for operation without the mechanical water pump (the mechanical pump is removed/replaced).
  • Safety / diagnostic indicatorLED diagnostics: Green = OK, Red = Warning.
  • Fail-safe behaviourIn case of malfunction, the cooling system operates again as in stock configuration (fallback strategy).
  • Important noteNever switch the pump on without coolant! The mechanical seal must run lubricated.

3IEC Kit Contents – RACING YAMAHA Ténéré 700 19–20 Euro 4

  • Electric water pump MT-WP110
  • IEC control unit / ECU MT-ECU-YT700-OP
  • Pump bracket
  • ECU bracket
  • Silicone hose (pump inlet)
  • Silicone hose (pump outlet)
  • Mechanical pump cover (mechanical pump cover)
  • Hose clamps
  • Mechanical pump cylinder plug / blanking part

4Quick Installation Overview

  1. Remove fairings/attachments and drain the cooling system.
  2. Expose the OEM cooling circuit in the pump area; remove the mechanical water pump according to the workshop manual. Ideally keep OEM parts (restoration option).
  3. Racing setup: the mechanical pump is replaced (install kit components in the pump seat) and fit the cover/CNC cap with the O-ring correctly seated.
  4. Position the pump on the frame using the brackets, route the silicone hoses, align the hose clamps and tighten.
  5. Install the ECU in the battery area using the bracket; connect battery positive/negative; integrate the CAN/KEY wiring according to the manual; connect pump and fan wiring (incl. relay); mount the LED status ring on the handlebar.
  6. Fill and bleed the cooling system thoroughly. Never run the pump dry. Then check for leaks and refit the fairings.

5Quick Specs

VehicleRACING Yamaha Ténéré 700 (2019–2020) Euro 4
Kit / SKUMT-K-YT7A/4
ComponentsMT-WP110 + MT-ECU-YT700-OP + brackets + silicone hoses + hose clamps + pump-area cover
Package size30 × 30 × 15 cm

Properties

FUNCTION STAND ALONE

Compatibility

BrandModelYears
YamahaYAMAHA TÉNÉRÉ T7002019–2020

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.