STAND-ALONE Kit elektrical waterpump MONZATECH MT-K-ESA110
Regular price:
€979.00
Available, delivery time: 1-2 weeks
Product number: MT-K-ESA110_STDALN
Product "STAND-ALONE Kit elektrical waterpump MONZATECH MT-K-ESA110"
Benefits
- maintains stable engine temperatures under high load (holds a target temperature range)
- stand-alone operation: no CAN connection , kit inludes an external temperature sensor wired directly to the kit ecu
- proportional control of pump flow rate and (optional) fan output
- after-run cooling: cooling can continue with the engine OFF
- reduced wear thanks to controlled thermal management
| Easy Installation | Generic plug-&-play kit for universal applications – only ignition +12V (Key) and battery connections are required. |
| Stand-alone Control (No CAN) | The controller reads the signal directly from the water temperature sensor – no vehicle-specific CAN integration needed. |
| Target Temperature Control | Keeps the engine within a defined temperature range for consistent performance and improved reliability. |
| Proportionally Regulated Cooling | Pump flow (and fan output where applicable) is adjusted proportionally to real engine heat – efficient and demand-based. |
| Cooling After Shutdown | Supports active cooling with the engine OFF to reduce heat soak. |
| Wiring & Customization | Standard harness length is 1 m for flexible component placement; custom lengths available on request. |
| Diagnostics | Diagnostic LED for status/fault indication; installation documentation available. |
IEC Kit Contents – Stand-alone Kit MT-K-ESA110
Quick Installation Overview
Quick Facts
Important: The sensor must be installed in the designated sensor holder at the engine outlet. Pump positioning and hose routing are application-specific; hoses must be sourced separately and cut to length.
| 1. | Electric water pump 110 L/min |
| 2. | IEC control unit MT-CU-ESA110 |
| 3. | Diagnostic LED |
| 4. | External water temperature sensor (for sensor holder) |
| 5. | Stand-alone wiring harness (standard length 1 m) |
| 1. | Install the sensor in the black aluminium sensor holder and position the holder at the engine outlet. |
| 2. | Define the pump location (application-specific) and route/trim coolant hoses to fit. |
| 3. | Mount the control unit in a suitable location and route the wiring cleanly. |
| 4. | Connect electrics: wire ignition +12V (Key) and battery. |
| 5. | Connect fan control: the fan output comes with open wire ends; select and install the correct connector/adapter for your application. |
| 6. | Fill and bleed the cooling system thoroughly. Never run the pump dry. |
| 7. | 📄 Installation manuals & wiring / Download |
| Part / SKU | MT-K-ESA110 (Stand-alone Kit) |
| Application | Universal IEC kit for various motorcycle/engine applications (stand-alone, no CAN) |
| Sensing | Water temperature sensor (signal directly to the controller) |
| Pump | Electric water pump 110 L/min |
| Pump Port Options | Available with vertical inlet / horizontal outlet or 90° inlet / horizontal outlet |
| Pump Dimensions | Ø 54 mm (body) • 140 mm (body length) • 160 mm (body + outlet) |
| Control Unit Dimensions | 80 mm (W) • 110 mm (L) • 19 mm (T) |
| Notes | Coolant hoses are not included; fan output comes with open wire ends (connector depends on application). |
Important: The sensor must be installed in the designated sensor holder at the engine outlet. Pump positioning and hose routing are application-specific; hoses must be sourced separately and cut to length.
Universal stand-alone system without CAN connection. Brand and model names are used for reference only.
| FUNCTION: | STAND ALONE |
|---|
Compatibility
| Brand | Model | Years |
|---|---|---|
| Aprilia | APRILIA RSV4 1100 | 2021-2026 |
| Aprilia | APRILIA Tuono V4 1100 | 2015-2026 |
Login or Register with...
Login
No reviews found. Share your insights with others.
