Skip to main content Skip to search Skip to main navigation
Go to homepage

Yamaha Ténéré T700 22-25 Euro 5 electrical waterpump Kit MONZATECH

Product "Yamaha Ténéré T700 22-25 Euro 5 electrical waterpump Kit MONZATECH"

The intelligent cooling system for consistent engine temperatures, optimal performance and maximum durability – fully plug-and-play, track-proven and reliable.

Benefits
  • Optimal engine temperature control – keeps the engine within the desired temperature window.
  • No power loss even under heavy use – efficient electric pump control instead of fixed mechanical load.
  • Proportional control of coolant flow and fan airflow based on actual engine heat.
  • Reduced engine wear thanks to more stable thermal operating conditions.
  • Cooling even with the engine OFF – active heat-soak prevention.
Key Technical Features
Plug-&-Play installationVehicle-specific kit with dedicated silicone hoses and professional wiring – designed for straightforward installation.
IEC temperature managementThe IEC system reads coolant temperature data via CAN-Bus and an additional sensor integrated in the pump, then controls pump and fan output to maintain optimal engine temperature.
Proportional cooling controlMonzatech ECU dynamically increases or decreases coolant flow and airflow according to real thermal demand.
CAN diagnostic functionality retainedThe CAN connector is split to keep the original diagnostic connector functionality (and battery maintainer functionality, where applicable).
LED status diagnostics + fail-safe behaviorLED ring indicates system status (green = OK, red = warning). In case of IEC malfunction, the bike’s cooling system returns to stock “ex factory” operation.
Safety noteNever switch on the pump without coolant – the mechanical seal must run lubricated.
 
IEC Kit Contents – YAMAHA TÉNÉRÉ T700 2022–2025 Euro 5
1.Electric water pump MT-WP110
2.Control unit MT-ECU-YT700-0P
3.Electric water pump carbon bracket
4.Control unit bracket
5.Electric water pump inlet silicone hose
6.Electric water pump outlet silicone hose
7.Radiator silicone hose
8.Black metal clamps
Quick Installation Overview
1.Remove fairings (and the ignition lock cover) to access the cooling circuit and wiring paths.
2.Drain the coolant: remove the radiator bleed screw, then remove the radiator cap and fully bleed the system.
3.Install MONZATECH silicone hoses (with the supplied black metal clamps). Mount the pump bracket, fit the 45° hose (trim to center the pump on the bracket), and secure the pump.
4.Fill and bleed the system: pour coolant into the radiator and squeeze the silicone hoses several times to release air until the coolant level remains constant. Never power the pump without coolant.
5.Mount the ECU bracket on the left engine crankcase (together with the OEM relay bracket), then fix the ECU in position.
6.Connect wiring: BATT to battery terminals; CAN to the bike’s diagnostic connector (move the original cap to the Monzatech harness); KEY via the supplied tap-fuse (Panigale 959/1199/1299: use the 3rd fuse from the right terminal block as specified); connect PUMP, FAN relay connections, and route/install the LED status ring on the left handlebar.
7.📄 Installation manual / Download
Quick Specs
VehicleYAMAHA TÉNÉRÉ T700 2022-2025 Euro 5
KitMONZATECH IEC Plug-&-Play Kit MT-K-YT700/5
Control strategyAutomatic temperature control with proportional pump + fan management, including after-run cooling (engine OFF).
Dimensions30 × 30 × 15 cm
Shipping time7–10 working days
NoteNever run the pump dry – bleed thoroughly after filling.

Important:
The IEC system can keep cooling active after engine OFF to prevent overheating via after-run cooling. Never power the pump without coolant.

Compatible with YAMAHA TÉNÉRÉ T700 2022–2025 Euro 5. Brand and model names are used for identification purposes only.

FUNCTION: ADDITIONAL

Compatibility

BrandModelYears
YamahaYAMAHA TÉNÉRÉ T7002022-2025

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.